3313x-1 (reverse pin layout) recommended land pattern 1 2 3 1.5 0.15 (.059 .006) 2.3 0.2 (.091 .008) 1.3 0.1 (.051 .004) 0.65 (.026) 1.1 (.043) 0.6 (.024) 4.5 (.177) 1.6 (.063) 2.2 0.2 (.087 .008) 0.15 (.006) 1.6 (.063) 0.6 (.024) 1.1 (.043) 1.60 (.063) 0.66 0.1 (.026 .004) 2 plcs 2 plcs 1.47 0.15 (.058 .006) 3313x-2 (reverse pin layout) 1 2 3 3313j-1 3.5 0.2 (.138 .008) 3 2 1 adj. slot 0.52 (.020) 1.93 (.076) 0.51 (.020) wide x x deep long 3313j-2 3.5 0.2 (.138 .008) 3 2 1 adj. cross slot 0.45 (.018) 0.51 (.020) 1.42 (.056) 1.68 (.066) wide deep x 3.2 +0.4/-0.2 (.126 +.016/-.008) 3.2 +0.4/-0.2 (.126 +.016/-.008) features surface mount 3 mm square single-turn cermet / sealed compatible with surface mount manufacturing processes rotor stop for ?in-circuit? adjustment 100 cycle rotational and seal life plastic housing for rf applications reverse pin layout option (model 3313x) rohs compliant* - see processing information on rohs compliant surface mount trimmers for trimmer applications/processing guidelines, click here halogen free models available** 3313 - 3 mm trimpot ? trimming potentiometer ??fluorinert? is a registered trademark of 3m co. speci? cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their speci? c applications. * rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. **halogen free product is identi? ed by a black housing color. bourns follows the prevailing de? nition of ?halogen free? in the industry. bourns considers a product to be ?halogen free? if (a) the bromine (br) content is 900 ppm or less; (b) the chlorine (cl) content is 900 ppm or less; and (c) the total bromine (br) and chlorine (cl) content is 1500 ppm or less. electrical characteristics standard resistance range ......................10 ohms to 2 megohms (see standard resistance table) resistance tolerance ........... ?0 % std. end resistance ..... 1 % or 3 ohms max. (whichever is greater) contact resistance variation .................................... 3 % or 3 ohms adjustability voltage divider ........................ ?.1 % rheostat .................................. ?.2 % resolution ................................... in nite insulation resistance ............... 500 vdc. 100 megohms min. dielectric strength sea level................................ 500 vac 70,000 feet ............................ 350 vac adjustment angle .................. 220?nom. environmental characteristics max. soldering exposure ............................... 260 ?/5 seconds power rating (200 volts max.) 70 ? .................................. 0.125 watt 125 ? ....................................... 0 watt operating temp. range ............................... -55 ? to +125 ? temperature coef cient .................. 100 ohms ?50 ppm/?; ................... >100 ohms ?00 ppm/? seal test ......................85 ? fluorinert? humidity ...... mil-std 202, method 106 (no vibration) trs ? %; ir 10 megohms vibration .....20 g trs ? %; vrs ? % shock .......100 g trs ? %; vrs ? % load life ...............................1000 hours @ 70 ? rated power;trs ?3 % rotational life ..... 100 cycles trs ? % thermal shock ..........................5 cycles trs ? %; vrs ? % physical characteristics mechanical angle ................. 250 ?nom. torque ...............................50 g-cm max. stop strength ..................200 g-cm min. pushover strength (??style only) ........ 1.6 kilograms (3.5 lbs) minimum flammability ..........................u.l. 94v-0 weight ......................... approx. 0.01 oz. marking ........................ resistance code and date code wiper ............... 50 % (actual tr) ?0 % standard packaging j, x styles .............. 1000 pcs./7 ?reel s style ...................... 200 pcs./7 ?reel adjustment tool ..............................h-91 product dimensions 1 3 cw clockwise ccw 2 wiper tolerances: 0.25 except where noted (.010) dimensions: mm (inches) 3313s-1 recommended land pattern 1 3.61 .20 (.142 .008) 2 3 2.39 (.094) 0.71 0.20 (.028 .008) 2.62 (.103) 1.57 (.062) 2.77 (.109) 0.15 0.03 (.006 .001) adj. slot .52 0.03 (.020 .001 ) 1.93 0.03 (.076 .001 ) .51 0.06 (.020 .002 ) 3.02 (.119) 1.57 (.062) 1.12 (.044) 1.15 (.045) wide x x deep long 2.39 (.094) 3 plcs 2 plcs position rotor as shown within 11 of centerline of terminal 2 3.71 (.146) 1.30 (.051) 5.35 (.211) typ typ 3313s-2 1 3.61 (.142) 2 3 adj. slot .45 0.03 (.018 .001 ) 1.93 0.03 (.076 .001 ) .51 0.06 (.020 .002 ) 3.02 (.119) wide x x deep long position rotor as shown within 11 of centerline of terminal 2 *rohs compliant **halogen free models available
how to order 3313 j - 1 - 502 e model style standard or modi ed product indicator -1 = standard single slot -2 = standard cross slot -gk2 = halogen free single slot (black housing color) -gl5 = halogen free cross slot (black housing color) resistance code embossed tape 1000 pcs. / 7 ?reel (j, x styles) 200 pcs. / 7 ?reel (s style) ?trimpot? is a registered trademark of bourns, inc. speci? cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their speci? c applications. 3313 - 3 mm trimpot ? trimming potentiometer rev. 06/13 3313j, x packaging speci cations 3.65 0.10 (.144 .004) 5.50 0.05 (.216 .002) 2.0 0.10 (.079 .004) 1.75 0.10 (.069 .004) 12.0 0.20 (.472 .008) 1.5 .10 (.059 .004) meets eia 481 20.2 (.795) min. 13.0 0.2 (.512 .008) 177.8 2.03 (7.000 .080) equal spaced 3 plcs min. 50.0 (1.969) min. reel tape 2.50 0.10 (.098 .004) .30 0.10 (.012 .004) 3.9 0.10 (.154 .004) 1.5 0.20 (.059 .008) 4.0 0.10 (.157 .004) dia. 12.40 + 2.00/ -.000 (.488 + .078/ -.000) 18.39 (.724) max. dia. 1.5 (.059) tolerances: 0.25 except where noted (.010) dimensions: mm (inches) 3313s packaging speci cations 20.2 (.795) 13.00 0.20 (.512 .008) 177.8 2.03 (7.000 .080) equal spaced 3 plcs min. 50.0 (1.969) min. 16.40 + 1.78/ -.000 (.646 + .070/ -.000) reel dia. 22.4 (.882) dia. min. max. 1.5 (.059) tape 7.50 0.10 (.295 .004) 4.10 0.20 (.161 .008) 4.00 .10 (.157 .004) 2.00 .010 (.079 .004) 4.20 .020 (.165 .008) 1.5 .10 (.059 .004) dia. 1.5 0.20 (.059 .008) dia. 5.80 0.10 (.228 .004) .40 (.016) max. 16.00 .30 (.630 .012) 12.00 0.10 (.472 .004) 5 2 standard resistance table resistance part marking resistance (ohms) code code 10 a1 100 20 21 200 50 51 500 100 a2 101 200 22 201 500 52 501 1,000 a3 102 2,000 23 202 5,000 53 502 10,000 a4 103 20,000 24 203 50,000 54 503 100,000 a5 104 200,000 25 204 500,000 55 504 1,000,000 a6 105 2,000,000 26 205 popular distribution resistance values listed in boldface. special resistances available.
|
